Claude DOZORME Thiers RLT mammoth tusk damascus blade
Exclusive Thiers RLT knife with a stainless damask bladeFeaturing handles made from stabilised mammoth tusk. Mineral deposits give rise to this richly coloured grain. The last mammoths died out only 8,000 to 10,000 years ago. Today, mammoth ivory is found mainly on the Siberian Arctic coast. Export is only permitted following a scientific assessment and with the appropriate licence. However, mammoth ivory is not subject to the Convention on International Trade in Endangered Species and may be traded freely.This elegant Thiers knife features a stainless damask blade made from DSC® STAINLESS steel by Markus Balbach. The stainless steel has a very fine grain structure and a Rockwell hardness of approximately 62 HRC. It impresses with its sharpness and edge retention.The blade action can be adjusted using a small key supplied with the knife. The extra-wide bolsters and the guard have been elaborately guilloché by hand. The finish of the Thiers knife is shiny.knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales mammoth tusk bluebolsters shinyblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
Claude DOZORME Thiers RLT mammoth tooth blue damascus blade stainless
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from mammoth tooth blue color, engraving by hand, stainless damascus blade knife lenght open 21,5 mmweight 158 gramm blade 9,5 mmblade width 19 mmblade thickness 2.6 mmscales mammoth tooth blue, stabilizedbolsters shinyblade stainless DSC® inox damascus steel 120 layer rockwell HRC 62 from Markus Balbach/Germanyresort with engraving by handdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT maple burl VG10 damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from maple burlwood, engraving by hand, stainless damascus blade stainless VG10 steel HRC 60, 61 layers knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel VG10 stainless, 60 HRCresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
Claude DOZORME Thiers RLT maple burl VG10 damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from maple burlwood, engraving by hand, stainless damascus blade stainless VG10 steel HRC 60, 61 layers knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel VG10 stainless, 60 HRCresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
Claude DOZORME Thiers RLT maple burl VG10 damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from maple burlwood, engraving by hand, stainless damascus blade stainless VG10 steel HRC 60, 61 layers knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel VG10 stainless, 60 HRCresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
Claude DOZORME Thiers RLT maple burlwood damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from maple burlwood, engraving by hand, stainless damascus blade DSC® STAINLESS from Markus Balbach knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, wooden box100% made in France
Claude DOZORME Thiers RLT maple burl
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from nice maple burl, engraving by hand, stainless steel blade 14C28 Sandvik knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales maple burlbolsters matblade steel stainless steel 14C28N Sandvik 58 - 61 HRCresort with engravingdelivered with certificate and box100% made in France
Claude DOZORME Thiers RLT mammoth tooth brown damascus blade stainless
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from mammoth tooth blue color, engraving by hand, stainless damascus blade knife lenght open 21,5 mmweight 167 gramm blade 9,5 mmblade width 19 mmblade thickness 2.6 mmscales mammoth tooth brown, stabilizedbolsters shinyblade stainless DSC® inox damascus steel 120 layer rockwell HRC 62 from Markus Balbach/Germanyresort with engraving by handdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT mammoth cruste damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France,the scales are made from rar blue green mammoth crust, engraving by hand, stainless damascus blade DSC® STAINLESS from Markus Balbachknife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales blue green mammoth crustbolsters shinyblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingweight 154 grammdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME RLT horntip damascus blade
Exclusive Thiers RLT knife with a stainless damask bladeThe handle scales are crafted from flamed horn. This elegant Thiers knife features a stainless damask blade made from DSC® STAINLESS steel by Markus Balbach.The stainless steel has a very fine grain structure and a Rockwell hardness of approximately 62 HRC. It impresses with its sharpness and edge retention.The blade action can be adjusted using a small key supplied with the knife. The extra-wide bolsters and the guard have been elaborately guilloché by hand. The finish of the Thiers knife is polished.
Claude DOZORME Thiers RLT ram horn damascus blade and bolsters
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from ram horn, engraving by hand, stainless damascus blade and bolsters DSC® STAINLESS from Markus Balbach knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales ram hornbolsters damacus blade and bolsters steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT horn tip
Elegant, noble Thiers knife from Claude Dozorme with handle scales made of flattering horn tip. The traditional handle material is available in many colour nuances, from very light with shocko-coloured inclusions to brown striped.The tight back spring is beautifully decorated by hand. Claude Dozorme includes a small key to adjust the movement of the blade. The polished blade is made from high-quality 14C28N steelIn 1980, this knife shape, which is based on the shape known since 1528, was declared Le THIERS by a jury of which Claude DOZORME was a member. Fixed rules were drawn up for its manufacture, guaranteeing the buyer a high quality of workmanship.Le Thiers is a protected name and these knives are 100% Made in France! Total length 220 mmBlade length 90 mmBlade width 19 mmBlade thickness 2.8 mmBlade hardness 58 - 61 HRCHandle: Horn tip polished bolstersBlade polished 14C28Nguilloché back springgift box
Claude Dozorme Thiers RLT L'ATELIER mammoth damascus blade
Thiers knife RLT with stainless damascusbalde und fossile, stabilized mammoth tuskweight: 158 gscales 12 cm knife opent: 21,5 cm blade 10 cm stainless Damas 120 layers DSC® inox HRC62 delivered with leahter sheat wooden box and certificathandmade in France
Claude DOZORME Thiers RLT ebony
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from ebony, engraving by hand, stainless steel blade 14C28 Sandvik knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales ebonybolsters shinyblade steel stainless steel 14C28N Sandvik 58 - 61 HRCresort with engravingdelivered with certificate and box100% made in France
Claude DOZORME Thiers RLT thuya burl damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from thuya burl, engraving by hand, stainless damascus blade DSC® STAINLESS from Markus Balbach knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales thuya burlbolsters matblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT ram horn
Elegant, noble Thiers knife by Claude Dozorme with handle scales made of fine ram's horn.The tight back spring is beautifully decorated by hand. Claude Dozorme includes a small key to adjust the movement of the blade. The polished blade is made from high-quality 14C28N steelIn 1980, this knife shape, which is based on the shape known since 1528, was declared Le THIERS by a jury of which Claude DOZORME was a member. Fixed rules were drawn up for its manufacture, guaranteeing the buyer a high quality of workmanship.Le Thiers is a protected name and these knives are 100% Made in France! Total length 220 mmBlade length 90 mmBlade width 19 mmBlade thickness 2.8 mmBlade hardness 58 - 61 HRCHandle: ram horn polished bolstersBlade polished 14C28NBack spring guillochégift box
Claude DOZORME Thiers RLT ram horn damascus blade (2)
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from ram horn, engraving by hand, stainless damascus blade DSC® STAINLESS from Markus Balbach knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales ram hornbolsters shinyblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT poplar burl
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from poplar burl, engraving by hand, stainless steel blade 14C28 Sandvik knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales poplar burlbolsters shinyblade steel stainless steel 14C28N Sandvik 58 - 61 HRCresort with engravingdelivered with certificate and box100% made in France
Claude DOZORME Thiers RLT poplar burl green damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from wood and Nid d'abeile, engraving by hand, stainless damascus blade DSC® STAINLESS from Markus Balbach knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales poplar burl greenbolsters shinyblade steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT ebony damascus blade and bolsters
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from ebony wood, engraving by hand, stainless damascus blade and bolsters DSC® STAINLESS from Markus Balbach knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales ebonybolsters damascusblade and bolsters steel 61-62 HRC DSC® STAINLESS Balbachresort with engravingdelivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT stag horn damascus blade
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from real stag horn, engraving by hand, stainless damascus blade DSC® STAINLESS from Markus Balbach knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales ram hornbolsters shinyblade steel 61-62 HRC DSC® STAINLES Balbachresort with engravingweihgt 162 gramm delivered with certificate, leather sheath, box100% made in France
Claude DOZORME Thiers RLT buffalo horn
handmade Thiers knife made in the company CLAUDE DOZORME in Thiers, the capital of knife manufacturer in France, the scales are made from buffalo horn, engraving by hand, stainless steel blade 14C28 Sandvik knife lenght open 220 mmblade 90 mmblade width 19 mmblade thickness 2.8 mmscales buffalo hornbolsters shinyblade steel stainless steel 14C28N Sandvik 58 - 61 HRCresort with engravingdelivered with certificate and box100% made in France
Claud DOZORME Thiersknife RLT ebony stainless damascus blade
scales made from ebony, Thiers knife, handmade in France, total length 215 mmBlade 90 mmscales ebonybolsters shinyblade Damascusl 61-62 HRC stainless DSC® Balbachspring and plates handcarved supplied with a leather sheat and wooden box100% made in France
Claude DOZORME Thiers RLT L'ATLIER Mammutbackenzahn rot Damastklinge
Einzelstück -aus der Kollektion L'ATELIER Claude Dozorme - besondere EinzelanfertigungenThiers Messer RLT mit rostfreier DSC®Damastklinge und rotem MammutbackenzahnEdles Einzelstück mit Griffschalen aus fossilem Mammutbackenzahn (stabilisiert). Beeindrucken ist die verarbeitete Materailstärke des exklusiven Materials.Heute findet man vor allem an der sibirischen Polarmeerküste Mammut-Elfenbein. Eine Ausfuhr ist nur nach einer wissenschaftlichen Auswertung und entsprechender Lizenz möglich. Mammut-Elfenbein/Mammutbackenzahn unterliegt aber nicht dem Artenschutzabkommen und darf frei gehandelt werden.Die extra breit gestaltetes Platine wurde von Hand mit edler Feilarbeit versehen. Ebenso schön ist das Resort verziert. Das i-Tüpelchen dieses exklusiven Messers ist sicherlich die rostfreie Damastklinge. Der Damaststahl aus dem Hause Markus Bahlbach hat eine Rockwellhärte von 61-62HRC. Der DSC® rostfrei besteht aus 80 bis 500 Lagen. DSC® ist die Abkürzung für Damaststahl SuperClean und als Marke beim Deutschen Marken- u. Patentamt unter der Nummer 30 2008 009 468 eingetragen. Das Finish des Resorts, sowie der Backen, ist poliert.Die Klingengängigkeit kann mittels eines kleinen mitgelieferten Schlüssels justiert werden.